Three sets of stators and rotors are equipped in working cavity. Driving shaft in working cavity is an arm, electrical motor and the shaft in bearing cabinet can be connected by spring coupling to improve the operation quality of driving shaft. Seal form can be selected in different conditions It is fit for middle-large scale on-line continuous production or circulated treatment production process mixing mixer vacuum emulsifying machine
1. Flow listed on the table refers to the data measured when the medium is water, the exit pressure ≤ 0.2Mpa of the model listed in the table.
2. In conditions of high temperature, high pressure, flammability, explosion and erosion, relevant parameters must be provided clearly for selecting customization precisely.
3. For poor liquid medium, a pump which has a matching flow is suggested to feed at the inlet, input pressure ≤ 0.2Mpa.mixing mixer vacuum emulsifying machine
4. If the data in the table is modified no further notification will be given, and the right parameters as per the provided sample.
1. Mass production suitable for continuous production of industrialized assembly line 2. Small diameter range, and highly even 3. Time saving, highly efficient and energy saving 4. Low noise, stable operation 5. Reduced quality difference between lots 6. Material is fully dispersed and sheared 7. Deliver in short distance with low lift 8. Easy operation, convenient maintenance 9. Automatic control mixing mixer vacuum emulsifying machine